The ICTQual AB Level 2 Diploma in QA/QC Piping & Welding Inspector is designed for individuals who have a basic understanding of quality assurance and wish to build practical skills in QA/QC inspection for piping and welding projects. This course provides learners with enhanced knowledge of inspection procedures, materials, and safety protocols, enabling them to take on more responsibility in supporting quality assurance processes. Participants will develop skills in visual inspections, basic non-destructive testing (NDT), and documentation, providing them with the confidence to assist senior inspectors and contribute to maintaining high-quality standards on-site.
This Level 2 diploma is ideal for learners who have completed an entry-level course or have some practical experience in industrial inspection, welding, or piping. The program covers key concepts such as inspection planning, material assessment, welding quality, defect identification, and QA/QC reporting. By the end of the course, learners will be equipped to carry out routine inspection tasks, follow quality protocols, and support compliance with safety and regulatory standards. This diploma also serves as a stepping stone for further progression to higher-level QA/QC qualifications, ensuring a clear career development path in the piping and welding industry.
Course Overview
The ICTQual AB Level 2 Diploma in QA/QC Piping & Welding Inspector provides learners with a structured curriculum to develop practical QA/QC skills and technical knowledge. The course emphasizes fundamental inspection techniques, welding and piping materials, and quality management procedures. Participants will gain hands-on experience in identifying defects, conducting basic inspections, and maintaining proper documentation to support compliance and quality assurance objectives.
In addition, the course introduces learners to basic non-destructive testing (NDT) methods, risk awareness, and site safety procedures. Learners will also understand the importance of teamwork, communication, and adherence to industry standards in QA/QC processes. By integrating theory with practical exercises, this diploma ensures that learners are prepared to support inspection activities effectively and lay a strong foundation for career advancement and progression to Level 3 and higher QA/QC qualifications.
Key Highlights of the Course:
- Build practical QA/QC inspection skills for piping and welding projects.
- Learn basic non-destructive testing (NDT) methods for defect detection.
- Understand welding processes, materials, and quality standards.
- Develop skills in documentation, reporting, and compliance monitoring.
- Foundation for further study and career progression in QA/QC inspection.
Course Benefits
Enhance your skills and build a strong foundation for a career in QA/QC inspection within the piping and welding industry.
1. Practical Technical Skills
- Gain hands-on experience in basic inspection methods and defect identification.
- Learn to assess welding and piping materials for quality compliance.
2. Career Development
- Prepare for entry-level and assistant QA/QC inspector roles.
- Gain a recognized Level 2 qualification to enhance employability and career opportunities.
3. Non-Destructive Testing Exposure
- Introduction to essential NDT techniques such as visual inspection and basic ultrasonic testing.
- Develop skills to support defect detection and quality verification activities.
4. Safety and Compliance Knowledge
- Understand site safety, regulatory requirements, and QA/QC standards.
- Learn to follow inspection procedures while ensuring compliance and risk mitigation.
5. Professional Credibility
- Earn a Level 2 qualification recognized by industry employers.
- Establish a foundation for further learning and progression to higher-level QA/QC diplomas.
By completing this course, learners will gain practical QA/QC skills, a solid understanding of inspection and reporting procedures, and industry-recognized certification, preparing them for entry-level QA/QC roles and future career advancement.
Course Study Units
This qualification, the ICTQual AB Level 2 Diploma in QA/QC Piping & Welding Inspector, consists of 5 mandatory units.
- Intermediate Inspection Techniques: Tolerances & Dimensional Checks
- Piping Layouts, Joint Types & Welding Processes
- Non‑Destructive Testing Basics: Dye Penetrant & Magnetic Particle
- Inspection Planning: Test Plans, Checklists & Corrective Actions
- Industry Standards & Regulatory Compliance for Welding & Piping
Learning Outcomes
This qualification, the ICTQual AB Level 2 Diploma in QA/QC Piping & Welding Inspector, is designed to provide learners with practical knowledge and skills to perform intermediate-level inspection tasks in piping and welding projects. Upon completing this course, learners will be able to conduct inspections with greater accuracy, apply basic non-destructive testing (NDT) techniques, and support QA/QC procedures to ensure compliance with industry standards.
1. Intermediate Inspection Techniques: Tolerances & Dimensional Checks
- Understand inspection tolerances and dimensional standards for piping and welding systems.
- Conduct accurate measurements to verify compliance with project specifications.
- Identify deviations and support corrective action procedures.
2. Piping Layouts, Joint Types & Welding Processes
- Recognize common piping layouts, joint configurations, and welding methods.
- Understand how different welding processes affect inspection requirements.
- Support inspection activities by identifying areas prone to defects or non-conformance.
3. Non‑Destructive Testing Basics: Dye Penetrant & Magnetic Particle
- Gain practical knowledge of basic NDT methods including dye penetrant (PT) and magnetic particle testing (MT).
- Learn to detect surface defects and discontinuities in welds and piping systems.
- Assist senior inspectors in documenting and interpreting test results.
4. Inspection Planning: Test Plans, Checklists & Corrective Actions
- Understand how to prepare and follow inspection test plans and checklists.
- Identify non-conformities and recommend corrective actions under guidance.
- Support the planning and execution of inspection tasks to maintain quality compliance.
5. Industry Standards & Regulatory Compliance for Welding & Piping
- Understand key industry codes, standards, and regulations applicable to piping and welding inspections.
- Apply standards to ensure inspection activities comply with quality, safety, and regulatory requirements.
- Contribute to maintaining audit readiness and proper documentation.
Upon completing this diploma, learners will have developed practical inspection skills, foundational knowledge of NDT techniques, and an understanding of industry standards and compliance. Graduates will be prepared to support QA/QC inspection activities at an intermediate level and be ready to progress to higher-level QA/QC qualifications and roles in the piping and welding industry.
Who is This Course For?
This course is designed for individuals who already have basic QA/QC knowledge and are looking to build intermediate skills in piping and welding inspection. It is suitable for learners from technical, engineering, or industrial backgrounds seeking to enhance their inspection capabilities and gain industry-recognized certification.
1. Early-Career Technical Professionals
- Individuals with basic QA/QC knowledge looking to develop intermediate inspection skills.
- Technicians or apprentices aiming to support QA/QC inspection teams.
2. Aspiring QA/QC Inspectors
- Learners aiming to advance from entry-level roles to assistant or junior inspection positions.
- Professionals seeking practical skills in NDT methods, inspection planning, and defect identification.
3. Engineers and Industrial Technicians
- Mechanical, piping, or welding engineers looking to strengthen inspection knowledge.
- Technicians responsible for supporting quality checks, reporting, and compliance monitoring.
4. Career Advancers
- Individuals seeking to gain a recognized Level 2 qualification for career growth.
- Learners preparing for further QA/QC education or higher-level inspection responsibilities.
This course equips learners with intermediate QA/QC inspection skills, practical knowledge of NDT techniques, and an understanding of industry standards, enabling them to contribute effectively to piping and welding inspection projects and prepare for higher-level qualifications.
Future Progression
- Completing the Level 2 diploma provides learners with opportunities to advance their career and education in QA/QC inspection:
- Progress to Level 3 Diploma in QA/QC Piping & Welding Inspector for advanced skills and responsibilities.
- Move into Junior QA/QC Inspector or Assistant QA/QC Officer roles on industrial projects.
- Gain experience in Non-Destructive Testing (NDT) and defect evaluation.
- Prepare for supervisory or lead inspection roles with further training and experience.
- Explore consultancy or technical advisory positions in piping and welding quality compliance.
Academic Pathways:
- Learners completing this qualification can continue their professional development through:
- ICTQual AB Level 3 Diploma in QA/QC Piping & Welding Inspector for advanced inspection expertise.
- Technical diplomas or certificates in Welding, Piping, or Industrial Inspection.
- Specialized courses in NDT, Risk Management, or QA/QC Procedures.
- Future progression into Level 4 and Level 5 QA/QC Diplomas for career advancement.
Conclusion
The ICTQual AB Level 2 Diploma in QA/QC Piping & Welding Inspector equips learners with intermediate-level QA/QC knowledge, practical inspection skills, and familiarity with industry standards. Graduates will be able to assist in inspections, perform basic NDT techniques, and support compliance with regulatory and quality requirements. This diploma provides a clear foundation for career progression, preparing learners for Level 3 study and entry-level inspection roles in piping and welding projects.
